Power Requirements - Sundance Spas 780 series Owner's Manual

780 SERIES
• PROPER VENTILATION: Proper ventilation should be discussed
with an Engineer or authority competent enough to understand
the necessary provisions needed to vent moist or heated air and
air associated with chemical odors outdoors. When the spa is in
use considerable amounts of moisture will escape potentially causing
mold and mildew, over time this can damage certain surfaces and or
surroundings.
• SUFFICIENT ACCESS: In the unlikely event that you should ever
need to access or gain entry to any portion of the spa for servicing,
it is highly recommended that you plan your indoor installation to
provide full access to the entire spa.
• WARRANTY: Damage caused by not following these guidelines
or any improper installation not in accordance with local codes or
authorities is not covered under the spas warranty. Please consult
your local state or city building ordinances.
• DO NOT SHIM THE SPA. To ensure proper support the spa must sit
flat on the intended foundation.
5.0

Power Requirements

®
Sundance spas are designed to provide optimum
performance and flexibility of use when connected to the
maximum electrical service listed on pages 13-14. If you
prefer, your qualified technician can perform a minor circuit
board modification to allow your spa to accept an electrical service other
than the factory setting.
Note: Refer to pages 50-53 for circuit board configuration details or
contact your authorized Sundance dealer.
Page 12