Sundance Spas 780 series Owner's Manual page 60

780 SERIES
2. Treble Setting: Press the Audio button 2 times to access
the treble setting. The LCD display will change to "TRE 0,"
Figure E. Press the Up button to adjust the setting to a
maximum of +5. Press the Down button to adjust the setting down to
-5.
Note: The default setting is "0." This feature is disabled when a "Digital
Sound Processor" (DSP) setting is active such as "Rock," "Classic," or
"Pop."
3. Balance Setting: Press the Audio button 3 times to
access the balance setting. The LCD display will change to
"BAL L=R," Figure F. Press the Up button to adjust the setting
to a maximum of 10R (only the right side speakers will have volume).
Press the Down button to adjust the setting down to 10L (only the left
side speakers will have volume).
4. Fade Setting: Press the Audio button 4 times to access
the fade setting. The LCD display will change to "FAD
F=R," Figure G. Press the Up button to adjust the setting to a
maximum of 10F (only the front speakers will have volume). Press
the Down button to adjust the setting down to 10R (only the rear
speakers will have volume).
5. Digital Sound Processor (DSP) Setting: Press the
Audio button 5 times to access the DSP setting. The LCD
display will change to "DSP OFF," Figure H. Press the Up
button to select one of the preset settings such as Rock,
Classic or Pop. If a preset setting is select a small icon will
appear on the LCD display, Figure I.
6. Area Setting: Press the Audio button 6 times to access
the Area setting. The LCD display will change to "AREA
USA," Figure J. Press the Up button to select either USA or
EUR setting.
7. Loud Setting: Press the Audio button 7 times to access the
Loud setting. The LCD display will change to "LOUD OFF,"
Figure K. Press the Up button to select either OFF or ON.
8. Distant Setting: Press the Audio button 8 times to access
the Distant setting. The LCD display will change to "DX,"
Figure L. Press the Up button to select either Distant (DX) or
Local for station frequency. The "LOCAL" setting allows for better FM
reception when a local station is too strong. Leave the setting to "DX"
if this condition does not exist.
Page 56
Figure E
Figure F
Figure G
Figure H
ROCK
Figure I
Figure J
Figure K
Figure L