Kodak i780 Product Information page 7

LEDs — illuminates or flashes from top to bottom as follows:
8
Illuminates when the power is turned on and the scanner is idle.
This indicator will flash if the scanner is in "sleep" or lamp saver
mode.
Illuminates when the scanner is enabled and/or scanning, and
flashes when the scanner is powering up.
Flashes when a document has jammed in the transport or when a
multi-feed has been detected. Illuminates when a user-correctable
error has been detected.
Illuminates when you need to call Service.
Power switch — press the power switch on (I) or off (O) as required.
9
10 Exit deflector (optional) — aids in document stacking.
11 Paper Present Sensor — detects the presence of documents in the elevator tray.
12 Height Adjustment Wire — located underneath the output tray (not shown in photo), this wire
can be pulled out to raise the front of the output tray.
January 2008 6