Kodak i780 Product Information page 32

F R E
F R E
F R E
What customer-installable options are available?
The following accessories can be installed:
• The Kodak Feeder Kit for Ultra-Lightweight Paper allows you to feed lightweight paper
from a paper weight range of 25 g/m
feed module and separation roller that are specially designed to feed lightweight paper
through the scanner transport.
• The Kodak White Background Accessory. If you are scanning translucent documents, this
accessory will reduce black background bleed-through while scanning which produces whiter
images. The White Background Accessory comes with two white background strips that easily
replace the two black background strips in the scanner.
• The Kodak Manual Feeder. The Kodak Manual Feeder is available for manual feeding of
documents. This feeder provides a flat surface for easy feeding.
Will the i780 Scanner work with VRS?
No. Kofax applications can be supported through AIPE using the ISIS driver.
Does the i780 Scanner support JPEG 2000?
No, not at this time.
How many hours will the lamps last?
The long-life xenon lamps were designed to last the life of the scanner. If the lamps need to be
replaced, a Kodak Field Engineer will replace them at no extra cost (per the Kodak Service
Agreement).
What is the warm-up time for the i780 Scanner when they are in standby with lamps off?
Warm up times are as follows:
• 60 seconds for the lamps to stabilize after the scanner is turned on (from Energy-Star standby
mode).
• 5 seconds when recovering from a document jam or multi-feed error where the pod has been
opened.
• 90 seconds for calibration.
Scanning is not allowed during these warm-up times.
January 2008
Q U E N T L Y
Q U E N T L Y
Q U E N T L Y
2
to 75 g/m
A S K E D Q U
A S K E D Q U
A S K E D Q U
2
kg (7 to 20 lbs). This accessory includes a
E S T I O N S
E S T I O N S
E S T I O N S
33