HP Proliant DL580 Quickspecs page 24

QuickSpecs
Options
UPS Options (continued)
Rack-Mountable PDUs – 1U/0U
(Up to 12 outlets)
NOTE: 0U mounting brackets shipped with
the unit (separate option kit for 1U
mounting).
Modular PDUs 1U/0U
(Up to 32 outlets)
NOTE: 1U/0U mounting brackets shipped
with the unit (optimized for 10000
and 9000 series racks)
Rack Builder
DA-11372 World Wide — Version 25 — March 20, 2003
Cable, 10A, IEC320-C14 to IEC320-C19
NOTE: Power cord (291034-B21) connects ProLiant DL580 G2 servers to PDUs or
UPSs with IEC320-C13 output connections. This power cord has been
specifically designed to work with the ProLiant DL580 G2 server. Please NOTE
the following important precautions when deploying this power cord:
Use the cord only in conjunction with the ProLiant DL580 G2 server.
Use the cord to connect the ProLiant DL580 G2 server only to PDUs or
UPSs with IEC320-C13 output connections.
Do not use the cord with any other ProLiant or third party server.
Do not use the cord with any other office equipment or computers.
Do not use the cord as an extension cord.
Do not plug the cord into a wall outlet.
Failure to adhere to these precautions may invalidate the server warranty.
Compaq Power Distribution Unit-16A (200 to 240V) (WW)
NOTE: The 16A PDU also connects to the high volt models of the UPS R3000 XR
(need cable P/N 340653-001 for North America) and the UPS R6000 models.
Cable P/N 340653-001 required if connecting to UPS R3000 XR (192186-002
NA-High Volt model only).
Compaq Power Distribution Unit-24A (200 to 240V) (NA, Japan, LA)
NOTE: This PDU may also be used to connect to the low volt UPS R3000 XR model.
Compaq Power Distribution Unit-32A (200 to 240V) (Int'l)
Compaq Power Distribution Unit-40A (200 to 240V) (WW)
NOTE: Hardwire input required.
Compaq Power Distribution Unit-24A (100 to 127V) (NA, Japan, LA)
NOTE: L5-30 input.
1U PDU Mounting Brackets Kit
NOTE: Please see the following Power Distribution Unit (Zero-U/1U PDU) QuickSpecs for additional options
including cables:
http://www5.compaq.com/products/quickspecs/10838_na/10838_na.HTML
http://www5.compaq.com/products/quickspecs/10838_div/10838_div.HTML
Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC) (WW)
NOTE: This model has a detachable input power cord and is adaptable to country
specific requirements. The 16A PDU also connects to the high volt models of
the UPS R3000 XR and R6000 models. Cable P/N 340653-001 required if
connecting to UPS R3000 XR (192186-002 NA -High Volt model only).
Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127 VAC)
(NA, Japan)
NOTE: This model has a detachable input power cord and is adaptable to country
specific requirements. The 16A PDU also connects to the high volt models of
the UPS R3000 XR and R6000 models. Cable P/N 340653-001 required if
connecting to UPS R3000 XR (192186-002 NA -High Volt model only).
Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC)
(NA, Japan)
NOTE: L6-30 input.
Modular Power Distribution Units (mPDU), High Volt Model, 32A (200-240 VAC) (Int'l)
Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240 VAC) (WW)
NOTE: The 40A model has a hardwired input.
NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs) QuickSpecs for
additional options including cables:
http://www5.compaq.com/products/quickspecs/11041_na/11041_na.HTML
http://www5.compaq.com/products/quickspecs/11041_div/11041_div.HTML
Rack Builder for configuration assistance at
http://www.compaq.com/rackbuilder/.
hp ProLiant DL580 Generation 2 (G2)
291034-B21
207590-B21
207590-D72
207590-B31
207590-B23
207590-D71
215852-B21
(North America)
(Division/World Wide)
252663-B24
252663-D71
252663-D72
252663-B31
252663-B21
(North America)
(Division/World Wide)
24