Pro-Form CROSSWALK 3.0 XT User Manual page 19

THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information. The information
mode also allows you to select miles or kilometers as
the unit of measurement and to turn on and turn off the
demo mode.
To select the information mode, hold down the Stop
button, insert the key into the console, and then release
the Stop button. When the information mode is se-
lected, the following information will appear in the dis-
play:
The center of the
display will show
the total number
of miles or kilo-
meters that the
walking belt has
moved. The
lower right part
of the display will show the total number of hours that
the treadmill has been operated. In addition, an "E" for
English miles or an "M" for metric kilometers will appear
in the lower part of the display. To change the unit of
measurement, press the Speed increase button.
IMPORTANT: If a "d" appears in the display, the con-
sole is in the "demo" mode. This mode is intended to be
used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the indicators in the display will automati-
cally appear in a preset sequence; the buttons on the
console will not operate. If a "d" appears when the in-
formation mode is selected, press the Speed de-
crease button so that the "d" disappears.
To exit the information mode, remove the key from the
console.
19