Connecting To A Tv - Lorex LW2277 User Manual

Connecting to a TV

Before powering on the receiver, make sure
to first connect and power on the camera.
This will ensure a proper connection.
1
Screw the antenna to the back of the receiver.
Connect the yellow video input cable to a
2
video input on your recording device.
Connect the white audio input cable to an
3
audio input on your recording device.
NOTE: The audio input number or name should
match the video input (e.g. Video Input 1 and Audio
Input 1).
Connect the power cable to the power
4
adapter. Plug the power adapter into a power
outlet or surge protector.
Place the receiver in a place that will have
5
clear reception to your camera
OPTIONAL: Use the included double-sided
6
tape to attach the wireless receiver to a flat
surface (e.g. a desk or a wall).
Power on your television and select the input
7
that the receiver is connected to.
1. Avoid installing in a location which requires the wireless
signal to pass through cement, concrete, and metal structures.
This will reduce the range of transmission.
AUDIO (white)
VIDEO (yellow)
.
1
9