Skoda Radio Bolero Owner's Manual page 7

- On/Off button
1

›
switches the radio on and off (press)
›
for volume control (turn)
Menu knob
2
›
RADIO mode - turn for manual station adjustment; press briefly
to start/stop the automatic play (scan).
›
Menu mode - turn to change title; press briefly to start/stop the
automatic play (scan).
- changes over into the radio mode and changes the fre-
3
RADIO
quency range when in the radio mode
– changes over to the last played media source or selects a
4 MEDIA
new media source
– Telephone function – Muting of the current audio source
5 PHONE
- TIM function (Traffic Information Memory) recorded traffic
6 TIM
announcements can be replayed. After entering up to two differ-
ent TIM recording times in the SETUP menu, a recording of the
traffic announcements is also possible if the unit is switched off
- switch traffic information function (Traffic Program) on or off
7
TP
or pause playback of the currently recorded traffic bulletin
- enables setting-up the individually selected field
8 SETUP
- opens the sound and volume settings menu
9

Touch screen:fields with coloured surrounds on the screen are
10
currently "active" and can be operated by touching the screen.
CD case
11
Eject key - press briefly to move an inserted CD into the ini-
12 /
 
tial position ready for removal
SD memory card slot: SD memory cards, SDHC memory cards with
13
a size of 32 mm x 24 mm x 2.1 mm and a capacity of up to 32GB are
supported (FAT 32).
Switching the device on/off
›
Press and hold the On/Off button
After switching on the unit, the last audio source that was active before switch-
ing off will be played.
to turn the device on or off.
1
If the button is removed from the ignition while the device is still switched on, it
will turn off automatically. The device can be switched on again by pressing the
On/Off button . If the ignition is switched off, the device protects the vehicle
1
battery by switching off automatically after approx. one hour.
If you have switched the radio off by removing the ignition button, the radio
switches back on when the ignition is turned on again.
General - operation
The device screen is a so-called "touch screen". Fields with coloured surrounds on
the screen are currently "active" and can be operated by touching the screen. Ac-
tive fields, which call up a function or a menu, are called "function keys".
Moving objects or regulators
›
Place your finger on one of the movable elements on the screen, for example
the" slider " in a "scrollbar".
›
Move your finger across the screen without lifting it off. The element follows
the movement, but will move only within the predefined range.
›
At the desired point, lift your finger from the screen.
›
To view a menu, move the right slider in the scrollbar right to the bottom.
›
Alternatively, move the slider up and down on the screen by tapping the func-
tion keys and .
 
›
A sliding regulator in a set-up bar  can alternatively be moved by pressing
or
+
"Return to previous menu item"
To return to the previous menu, press the function button
"Scrollbar"
A vertical bar on the right side of the screen with a slider between the arrow keys
and is called a" scrollbar". It indicates that further menu entries become visi-

 
ble if the sliding regulator is moved completely to the bottom.
"Set value"
In a set-up menu a set-up or value is infinitely adjustable. Move the slider or
press or to change a displayed setting.
+ -
"Pop-up window"
A function key with an arrow  behind another function key shows the presently
selected set-up, e.g. with an
Acoustic feedback
Press the function button on the screen. This will open a so-called "Pop-up
Off

window" in which the various settings options can be viewed.
-
.

.
Off

General information


5