Skoda Radio Bolero Owner's Manual page 21

Search for an entry in the telephone book
›
In the Phonebook menu press the
book entry.
›
Tap to select character in the keypad and enter it into the entry line.
›
Press the function button to open the input screen for numbers and special

characters. Tap to return to the alphanumeric entry screen.
AZ
›
Press the function button to delete from left to right the characters in the

entry line from the position of the character entry.
›
If you tap the button, you connect to the first phone number which is stored

in the phonebook for the name displayed in the entry line.
Phonebook entries do not require case-specific search inputs.
Editing field: Indicate specific characters
Some letters are also marked with a small triangle "
characters based on this letter can be selected.
Press and hold one finger on the corresponding button until a pop-up window ap-
pears with these special characters. Accept the desired character by tapping into
the entry line - the pop-up window closes. If no entries are entered, the pop-up
window will close automatically after a few seconds.
Adapt a call number
Open the display of a number from the phonebook or a call list as described in the
relevant section.
›
Tap the arrow buttons or to move the character within the entry line.
 
›
Tap a character displayed in the character block to insert it after the add charac-
ter mark in the entry line.
›
Tap on the function button to connect to the displayed number.

Call lists
Only numbers missed, dialled and received with the phone kit in the vehicle are
saved. The call lists stored in a mobile phone will not be transferred to the vehi-
cle.
›
Tap on the function button in the TELEPHONEmain menu.
Calls
function button to seach for a phone-
Search
". This indicates that specific

›
In the opened pop-up window, tap the call list from which you want to select a
phone number. The corresponding list is displayed. Phone numbers for which
there is an entry in the phonebook are displayed with the appropriate name.
The function button can be used to display further information about the stor-

ed number.
›
- displays a list of un-answered calls made to the phone kit.
Missed
›
- shows a list of numbers to which a connection was attempted by the
Dialled
phone kit.
›
- displays a list of calls received via the phone kit.
Received
If the phone number from a call list is saved in the phonebook, instead of the
number, the name in the phonebook is saved.
Incoming calls which were rejected using the
call list of accepted calls.
Call lists are always assigned to a user profile, and appear only when the corre-
sponding SIM card is paired with the phone kit again.
Shortcut keys

After initial pairing with the SIM card in your phone, all speed-dial keys are unas-
signed when you call up TELEPHONE the main menu for the first time.
Assigning free shortcut keys
›
Tap briefly on a speed-dial button. This will open the Speed dial menu so you
can enter a name and phone number.
›
Tap the function button to open a screen in which you can enter a name.
Name
›
Tap the function button to display a screen for entering a number.
Number
›
Tap the or function buttons to assign a number from the appro-
Call Phonebook
priate list to this speed dial button.
 ›
Tap the function button and confirm with

lines.
›
Once the Speed dial menu entries are completed, tap the function button
›
The name you type in the TELEPHONE main menu is displayed in the speed-dial
button. The call number entered will be assigned to a shortcut key.
Calling up a connection via the shortcut key
›
Tap briefly on an assigned speed-dial button, to connect to the number stored.
Change pre-assigned speed dial keys
›
To change a speed dial button assignment, press and hold the speed-dial but-
ton until the Speed dial menu is opened for editing.
function button are saved in the

to delete the entries in all entry
OK
OK
19
Phone

.
