Serial Number - Husqvarna Rider Pro 15 Operator's Manual

Good service
Husqvarna products are sold all over the world and only through servicing dealers. This is to ensure that you,
the customer, get the best support and service. For example, before this machine was delivered it was
inspected and adjusted by your dealer. See the certificate in the Service Journal in this manual.
When you need spare parts or advice on service issues, warranty terms, etc., contact:
This Operator's Manual belongs to
machine with serial number:

Serial number

The serial number can be found on the printed plate attached to the front, left-hand side under the seat.
Stated on the plate, from the top are:
• The machines type designation.
• The manufacturer's type number.
• The machine's serial number.
State the type designation and serial number when ordering spare parts.
The engine serial number is given on a bar code decal. This is located on the left side of the crankcase, in
front of the starter motor. The sign states
• The engine serial number (E/NO).
• Code.
Please quote these when ordering parts.
The transmission's serial number is stated on the barcode decal located on the front of the housing on the
left-hand drive axle:
• Type designation is stated above the barcode and starts with the letter "K".
• The serial number is stated above the barcode and has the prefix "s/n".
• The manufacturer's type number is stated under the barcode and has the prefix "p/n".
State the type designation and serial number when ordering spare parts.
SAFETY INSTRUCTIONS
Engine Transmission
3
English –