Driving; Before Starting; Starting The Engine - Husqvarna Rider Pro 15 Operator's Manual

Before starting

• Read the safety instructions and information on
the location and function of the controls before
starting (see pages 5–14).
• Perform the daily maintenance before starting
(see Maintenance Schedule in the
"Maintenance" section).
• Adjust the seat to the required position.

Starting the engine

1. Lift up the cutting unit by pulling the lever back-
wards to locked position (transport position) and
apply the parking brake.
2. Move the throttle control to the middle position.
3. If the engine is cold move the choke lever
backwards to its end position.
4. Turn the ignition key to the start position.

DRIVING

6017-129
6017-134
6017-128
6017-135
15
English –