GE PNSF39Z01 Owner's Manual page 13

Feature: Other Data Displays
REMAINING CAPACITY
FLOW RATE (GPM)
DATA
GALLONS TODAY
AVG. DAILY GALLONS
By continuing to press the DATA button, you can scan
through four displays of operational information. This
data appears in the bottom portion of the display area.
REMAINING CAPACITY—
of water softening capacity remaining. Immediately after
a regeneration, 100% shows. As water is used, the
percentage decreases until the next regeneration.
During regenerations, the percentage increments upward.
NOTE: Zero(%) shows until after the first regeneration
begins, after connecting to electrical power.
FLOW RATE, GPM—
display shows the flow rate passing through the softener
(in gallons per minute). Zero shows if water is not passing
through the water softening system.
GALLONS TODAY—
midnight, the timer keeps a running count of the total
gallons of water that have passed through the water
softening system.
AVG. DAILY GALLONS—
the average gallons of water used by the household each
day over the past seven day period.
NOTE: If preferred, you can set the timer to show the
reading in liters instead of gallons. If GALLONS TODAY
or AVG. DAILY GALLONS exceeds 1999, a (x10) indicator
appears. This means you must multiply the number shown
by ten.
This is the percentage
WATER MANAGEMENT SYSTEM
%
CAPACITY
WATER MANAGEMENT SYSTEM
When using soft water, this
GPM
FLOW RATE
WATER MANAGEMENT SYSTEM
Each day, beginning at
GALLONS TODAY
WATER MANAGEMENT SYSTEM
The figure displayed is
AVG. DAILY GALLONS
13