GE GXSH40V Owner's Manual And Installation Instructions
  1. Manuals
  2. Brands
  3. GE Manuals
  4. Water Dispenser
  5. GXSH40V
  6. Owner's manual and installation instructions

GE GXSH40V Owner's Manual And Installation Instructions

Hide thumbs Also See for GXSH40V:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

See also: Installation Instructions & Owner's Manual
GEAppliances.com
om
0
(./3
U3
g3
Safety Information
....................
2
Specifications and Dimensions ........
3
About the Softener ....................
6
Before you Start .......................
7
Installation Requirements ..........
8-10
Installation Instructions ...........
11-15
Programming the Softener ........
16-21
Care and Cleaning .................
22, 23
Routine Maintenance .................
24
Before you call for Service .........
25-28
Exploded ViewlParts List ..........
31-34
Warranty (U.S.).......................
35
Warranty (Canada) ...................
36
Water Softening
System
Models GXSH4OV,GXSH45V
Write the model ond seriol
numbers here:
Model #
Seriol #
To find these numbers, lift
the cover and look on the rim
below the control panel.
Systems tested and certified by NSF International against
NSF/ANS!Standard 44 for the chemical reduction claims
specified on page 3.
Systems Tested and Certified by the Water Quality Association
against CSAB483.1.
If you have any questions or concerns when installing or maintaining your
water softener, call our toll free number at 800-952-5039 (US)or 866-777-7627
(Canada}, or visit www.geappliances.com
When you call, please be prepared
to provide the model and serial number of your product. This information can
be found on the rating decal located on the rim under the salt cover.
7329201
49-50283-1 01-12 GE

Advertisement

Table of Contents
loading

Related Manuals for GE GXSH40V

Summary of Contents for GE GXSH40V

  • Page 1 (Canada}, or visit www.geappliances.com When you call, please be prepared to provide the model and serial number of your product. This information can be found on the rating decal located on the rim under the salt cover. 7329201 49-50283-1 01-12 GE...
  • Page 2 IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. SAFETYPRECAUTIONS _k WARNING! For y our sdety, the information inthis manual must be _ollo_ed tominimize the risk of electric shock, property damage or personal injury. A WAR NI NG:oo &DANGER: not use with water Electric Shock Hazard: that is microbiologically unsafe or of unknown...
  • Page 3 Specifications Model GXSH40V GXSH45V Rated Capacity* (Grains@ Salt Dose) 11,700 @ 2,3 Ibs @ 2,6 Ibs 13,200 31,500 @ 8.7 Ibs, 55,700 @ 9,9 Ibs, 40,000 @ 15,1 Ibs.
  • Page 4 About the water softener system. SERVICE When the water softening system is providing After a period of time, the resin beads become soft water, it is called "Service." During service, coated with hard minerals and they have to hard water flows from the house main water pipe be cleaned.
  • Page 5 About the water softener system. NORMAL OPERATION, CONTROL DISPLAYS During normal operation, the present time of day and AM or PM and DAYS TO EMPTYshow in the control display area. The system will automatically recharge at the preset recharge time as needed. RECHARGE TONIGHT FEATURE: OPTIONAL...
  • Page 6 "Set Water Hardness Number" section. reduced life of the resin. In these conditions, may wish to consider purchasing a GE point-of- Ferric (red water), and bacterial and organically entry household filtration system with a chlorine bound irons are insoluble. This water softener reducing filter.
  • Page 7 Before you start. BEFORE YOU START The water softener requires a minimum water flow of 3 gallons per minute at the inlet. Maximum allowable inlet water pressure is 125 psi. If daytime pressure is over 80 psi, nighttime pressure exceed the maximum. Use a pressure reducing valve if necessary...
  • Page 8 Installation Requirements. DO NOT RUN HOT WATER THROUGH LOCATION REQUIREMENTS Consider all of the following when selecting an SOFTENER. Temperature of water passing installation location for the water softener. through the softener must be less than 120 ° F. Avoid installing in direct sunlight.
  • Page 9 Installation Requirements. PLUMBING CODES VALVE DRAIN REQUIREMENTS All plumbing must be completed in accordance Using the flexible drain hose (included) see Figure with national, state and local plumbing codes. 2, measure and cut to the length needed. Flexible drain hose is not allowed in all localities (check In the state of Massachusetts: The Commonwealth your plumbing codes).
  • Page 10 Installation Requirements. 3-VALVE BYPASS SYSTEM INLET/OUTLET PLUMBING REQUIREMENTS Always install either a single bypass valve For soft water service: Open the inlet and outlet (provided),as shown in Figure 4, or, if desired, parts valves and close the bypass valve. for a 3 valve bypass system (not included) can be For bypass hard water: Close the inlet and outlet purchased and assembled, as shown in Figure 5.

  • Page 11: Installation

    Installation Instructions. TYPICAL INSTALLATION Ground Hard Water Main Water Pipe Conditioned to Outside Water Faucets Clamp 1 /Pipe Incoming- _ Hard Water 2" NPT Sweat Ground Clamp Clip.s JAdaptor (not Plug-in t _included) Transformer Assembly l" NPT )ass Valve Threaded Adaptor O-ring Controller...
  • Page 12 Installation Instructions. TURN OFF WATER SUPPLY 1. Close the main water supply valve, located near the well pump or water meter. Salt 2. Open all faucets to drain all water from house Assembly pipes. NOTE: Be sure not to drain water from the water Ferrule heater, as damage to the water heater elements Brinewell...
  • Page 13 Installation Instructions. COMPLETE INLET AND OUTLET PLUMBING • Use Teflon Tape on all external pipe threads. Complete the inlet and outlet plumbing for the WARNING! type of pipe you will be using. Secure ground ELECTRICALSHOCK HAZARD: clamp to metal pipes. Install metal ground clamp to metal house water supply pipe before beginning installation.

  • Page 14: Install Valve Drain Hose

    Installation Instructions. INSTALL VALVE DRAIN HOSE TEST FOR LEAKS To prevent air pressure in the water softener and 1. Measure and connect the 3/8"drain line plumbing system, complete the following steps in (provided) to the water softener valve drain order: fitting.
  • Page 15 Installation Instructions. ADD WATER AND SALT TO THE SALT SANITIZE THE WATER SOFTENER/SANITIZE STORAGE TANK AFTER SERVICE 1. Open salt hole cover, remove the brinewell cover WARNING! and pour about 3 oz. (6 tablespoons) of household EXCESSIVEWEIGHT HAZARD: bleach into the softener brinewell. Replace the Use two or more people to move end lift brinewell cover.

  • Page 16: Programming The Water Softener

    Programming the Water Softener. Salt Level 1 orlmll-lr] GollonslMin i!) " Clock I ..% Remainin_t Days to Empty Hardness IH H H Ca,, to,Service Set ..) char , ,,, ,oo,0 , , Today/Now/Cancel Recharge Recharge SET TIME OF DAY When the transformer is plugged into the electrical outlet, a model code and test number 1.
  • Page 17 Programming the Water Softener. SET WATER HARDNESS NUMBER SET RECHARGE (STARTING} TIME 1. Press the MODE/SET button until the arrow 1. Press the MODE/SET button until the arrow points to HARDNESS. A flashing 25 will appear points to RECHARGE. in the display. Salt Level lr __,i-lt-I Clock /...

  • Page 18: Set Salt Level

    Programming the Water Softener. SET SALT LEVEL DAYS TO EMPTY 1. Press the MODE/SET button until the arrow 4 The words DAYSTO EMPTYand a number are points to SALT LEVEL. shown in the lower half of the display. This information is shown in the normal run display. This is to inform the user of the number of days Solt Level before the salt level in the brine tank reaches...

  • Page 19: Optional Control Settings

    Programming the Water Softener. OPTIONAL CONTROL SETTINGS BACKWASH AND FAST RINSE The controller display has several options and If you experience salty tasting water after features. regeneration, you may need to increase backwash and fast rinse times. The cycle times LOW SALT ALARM during regenerations...
  • Page 20 Programming the Water Softener. FEATURE: OTHER DATA DISPLAY RESETTING TO FACTORY DEFAULT Thesemodels have an option to havethe run display To reset the electronic controller to its factory indicate different information. The information default for all settings (time, hardness, etc.): displayed on the top half of the display can be changed 1.
  • Page 21 Programming the Water Softener. POWER OUTAGE MEMORY If electrical power to the water softener is lost, If there is an error code detected, the blue IZ I- !- "memory" built into the timer circuitry will keep all settings for up to 24 hours. While the power indicator light will flash 4 Call forServic ERROR SIGNALS...

  • Page 22: Care And Cleaning

    Care and cleaning. ADJUSTING YOUR WATER HARDNESS SERVICE POSITION The blend adjusting knob (Figure 16) gives the (Normal Softener Operation) ability to finely adjust hardness of the treated water Soft Water leaving the water softener. If slightly harder water Pult Hard is desired than is normally delivered by the water Handle...
  • Page 23 If your water supply has clear water iron, periodic NOTE: if using potassium chloride (KCI),do not fill resin bed cleaning is needed. GE recommends above level 4 on the brinewell decal. using Super Iron Out _' brand resin bed cleaner...

  • Page 24: Cleaning Nozzle/Venturi Assembly/Breaking Salt Bridge

    Routine Maintenance. CLEANING THE NOZZLE AND VENTURI ASSEMBLY A clean nozzle and venturi is needed for the water softening system to work properly. This small unit makes the suction to move brine from the salt storage area to the resin tank during recharge. If it becomes plugged with sand, dirt, etc., the water softening system wilt not work and you will get hard water.

  • Page 25: Troubleshooting

    "OUT" (service) position. • Hardness setting too low. Check hardness setting and adjust. Verify hardness of supply water- from local water company, water test or call the GE Answer Center (800-952-5039 in US). • Salt Bridge-salt solidifies above water level so that brine water is not in contact with salt.
  • Page 26 Before you call for service. Possible Cause What to do Using hot water while the water • Avoid using hot water during water softening softening system is regenerating system recharge because the water heater will refill with hard water. See Automatic Hard Water Bypass During Recharge section.
  • Page 27 Before you call for service. Possible Cause What to do Valve drain hose pinched, plugged, • A restriction in this drain hose may prevent proper elevated too high or otherwise operation of the nozzle and ventufi and reduce or restricted prevent brine draw during recharge.
  • Page 28 Before you call for service. Possible Cause What to do Wiring may hove worked loose in • Unplug external power supply. the control • Remove control cover, release clips on side. • Check for loose/incorrect wiring connections to electronic board or switch. Reconnect as required.
  • Page 29 6. Pressand hold the NODE/SETbutton until the mode to observecam and switch operation during valve code (H40for GXSH40V or H45 for GXSH45V) shows rotation. in the display. This codeidentifies the softener 1.
  • Page 30 Advanced troubleshooting for service. Service: Manually Advance Recharge Check NOTE: The control display must show a steady time (not NOTE: If water system pressure is low, an elevated drain hose may cause back pressure, stopping brine draw. flashing). 1. Press the RECHARGEbutton and hold in for three 5.
  • Page 31 Exploded View.
  • Page 32 Exploded View. 109-- 1i0--------- Cross-section View --152...
  • Page 33 Parts List. REF. NO. GE PART NO. PART DESCRIPTION (oo) (00) O0O2 WS31XlO051 BACK COVER, ELECTRONICS 0003 WS35XlO001 O-RING SEAL KIT 0004 WS34XlO023 DECAL, FACEPLATE 0005 WSO7XIO004 HOSE, DRAIN, 20 FT. 0006 WS31XlO044 FILTER SCREEN 0007 WSI4XlO002 DISTRIBUTOR, 0008 WS14XIO005...
  • Page 34 Parts List. REF. NO. GE PART NO. PART DESCRIPTION (oo) (00) Olii WS19XIOO05 SUPPORT SCREEN o112 WSO3XIOOl3 SCREEN WS22XlOO36 o113 FLOW PLUG, .15 GPM o114 WSO8XIOO08 GASKET, NOZZLE/VENT o115 CONE SCREEN WSO3XlOB73 o116 WS22X10021 PLUG, FILL FLOW .30 GPM o117...
  • Page 35 This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. If the product is located in on area where service by o GE Authorized Servicer is not available, you may be responsible for o trip charge or you may be required to bring the product to on Authorized GE Service location for service.
  • Page 36 GE Water Softening System Warranty.(For Customers in Canada) All warranty serviceprovided by our Factory Service Centersor an authorized technician. For service,call toll free 1.866.777.7627.Pleasehave serial number and model number available when calling for service. For The Period Of'. We Will Replace:...
  • Page 37 FOR IOWA USE ONLY All soles in Iowa require the following signature before consummation of sole. These signatures must be retained by seller/renter for 2 years minimum. Buyer/Renter Dote Seller Dote Seller's Address Seller's Phone No. Model GXSH40V or Model GXSH45V...
  • Page 38 California certificate. State of California Department of Public Health Water Treatment Device Certificate Number 11 - 2109 Date Issued: September 16, 2011 Trademark/Model Designation Replacenlent Elenlents GXSH45V 3eneral ElectricCompa_y Manufacturer: The water treatment de+ice{ Microbiolo and Turbidity Organic ('on_amiilantS Rated Service Capacity: Rated_S_rvige Flow: 9.5 gpm...
  • Page 39 Notes.
  • Page 40 Notes.
  • Page 41 Informaci6n sabre Seguridad ..Especificaciones y Dimensiones ..Acerca del Suavizante ....Antes de Comenzar ....Requisitos de Instalaci6n ..48-50 Instrucciones de Instalaci6n ..51-55 Programaci6n del Suavizante ..56-61 Cuidado y Limpieza ....62, 63 Rutina de Mantenimiento ..... Antes de solicitar el servicio .....
  • Page 42 INFORMACION IMPORTANTE DE SEGURIDAD. LEA TODAS LAS INSTRUCCIONES ANTES DEL USO. PRECA UCIONES DE SEGURIDAD iADVERTENCIA! su seguridad, se debe seguir /a informaci6n en este manual con el fin de reducir el riesgo de una descarga eldctrica, dahos a la propiedad o dahos personales. ,IkADVERTENCIA: kPELIGRO: Descarte...
  • Page 43 Especificaciones Modelo GXSH40V GXSH45V Capacidad Evaluada* (Granos por Dosis de Sat) ii,700 @ 2,5 Ibs @ 2,6 Ibs 13200 31,500 @ 8.7 Ibs,...
  • Page 44 Sobre el sistema de descalcificaci6n de aqua. SERVICIO Despu@s de un periodo de tiempo, la capa de resina se obstruye o se satura con los minerales Cuando el sistema descalcificador de agua esta duros y debe limpiarse. Esta limpieza se denomina proporcionando agua descalcificada, a esto se le recarga.
  • Page 45 Sobre el sistema de descalcificaci6n de a,qua. FUNCIONAMIENTO NORMAL, PANTALLAS DE CONTROL El sistema se recargara de forma automatica en el Durante el funcionamiento normal, la hora actual tiempo de recarga presente, seg0n sea necesario. del dia y AM o PH y DAYSTO EMPTY(DiAS HASTA VACIARSE) a parecen en el area de la pantalla de control.
  • Page 46 Una vez que el agua compra de un sistemade filtraci6n para hogar GE se asent6 par un perfodo de tiempo, las partfculas Point-Of-Entry con un filtro para la reducci6nde quedan en el fondo del envase.
  • Page 47 Antes de comenzar. ANTES DE COMENZAR • El suavizante de agua requiere un flujo mfnimo de agua de ] galones por minuto en la entrada. presi6n de entrada de agua m6xima tolerable es de 125 psi. Si la presi6n del d[a supera los 80 psi, es posible que la presi6n nocturna...
  • Page 48 Requisitos de Instoloci6n. NO HAGA CORRER AGUA CALIENTEA TRAVI% REQUISITOS DE UBICACION DELSUAVIZANTELa temperature del ague que Considere todo lo siguiente al seteccionar pasa a tray,s del suavizante deber6 ser inferior ubicaci6n de instalaci6n del suavizante de ague. a 120° F. , No coloque et suavizante de agua donde haya , Evite la instalaci6n directamente en contacto...
  • Page 49 Requisitos de Instalaci6n. C6DIGOS DE PLOMERIA REQUISITOS DEL DRENAJE CON V/_LVULA Toda la plomerfa deberci ser completada de Para el uso de una manguera de drenaje flexible acuerdo con los c6digos de plomeria nacional, (incluida) yea la Figura 2, mida y corte hasta la estatal y local.
  • Page 50 Requisitos de Instalaci6n. 3-SISTEMA DE DESVIACION CON V/_LVULA REQUISITOS DE PLOMERJA INTERIOR/ EXTERIOR Para el servicio con agua suave: Abra las Siempre instale una valvula de desviaci6n simple valvulas internas y externas y cierre la valvula de (provista), coma se muestra en la Figura/4, o, si Io desviaci6n.
  • Page 51 Instrucciones de Instalaci6n. INSTALACIONTJPICA Abrazadera TubeFa de Agua con Conexi6n Ague Dura Principal Ague Tierra hada Grifos Acondicionada E×ternos Agua Dur_ Cubierta Abrazadera con Cone×i6n a Tierra Entrante )iraci6n Su_dores Transfor- NPTde 1" (no mador de incluido) la V6lvula de /// Conexi6n Dtador Desviaci6n...
  • Page 52 Instrucciones de Instalaci6n. ClERRE EL SUMINISTRO DE AGUA 1. Cierre lav61vuladel suministro principal de aguo, ubicada Ensomble cerca de la bomba del pozo odel medidor de agua. Tape de de Boquillo ra Sol 2. Abra todos los grifos pare drenar toda el ague de las tuberias de la case.
  • Page 53 Instrucciones de Instalaci6n. COMPLETE LA PLOMERIADE ENTRADAY SALIDA • AI girar los accesorios de las tuberias roscadas en los accesorios de pl6stico, tenga cuidado de no cruzar las roscas. iADVERTENCIAJ • Use Cinta de Tefl6n en todas las roscas de tuberias RIESGO DE DESCARGA ELECTRICA: externas.
  • Page 54 Instrucciones de Instalaci6n. PRUEBA DE PI_RDIDAS INSTALE LA MANGUERA DE DRENAJE DE LA VALVULA Para evitar Japresi6n de aire en el suavizante de agua y en el sistema de plomerfa, complete los siguientes pasos 1. Mida y conecte la Ifnea de drenaje de 5/8" (provista) al en orden: aceesorio de drenaje de la v@lvula del suavizante de 1.
  • Page 55 Instrucciones de Instalaci6n. AGREGUE AGUA Y SAL AL TANQUE DE DESINFECTE EL SUAVIZANTE DE AGUA/ ALMACENAMIENTO DE SAL DESINFECTE LUEGO DEL SERVICIO 1. Abra la tapa del agujero de sal, retire la tapa del iADVERTENCIA! pozo de salmuera y vierLa alrededor de 3 oz.
  • Page 56 Programaci6n del Suavizante de Agua. Salt Level 1 O1-]mlI-II-I GollonslMin Mo0e- i!) " Clock I ..% Remaining Days to Empty Hardness IH H H Ca,, to,Service Set ..) char , ,,, Too,0 , Today/Now/Cancel Recharge I _,a l.a _,a Recharge Cuando el transformador estci enchufado en el CONFIGURE LA HORA DEL DJA tomacorriente el_ctrico, un c6digo de modelo...
  • Page 57 Programaci6n del Suavizante de Agua. CONFIGURE EL NUMERO DE DUREZA DEL CONFIGURACION DEL TIEMPO (INICIAL) DE AGUA RECARGA 1. Presione el bot6n MODE/SET (Modal 1. Presione el bot6n MODE/SET (Modo/ Configuraci6n) hasta que la flecha _ apunte a Configuraci6n) hasta que la flecha _ apunte a (Recargar).
  • Page 58 Programaci6n del Suavizante de Agua. D/AS HASTA VACIARSE CONFIGURE EL NIVEL DE SAL Las palabras DAYSTO EMPTY(DJASHASTAVACIARSE) 1. Presione el bot6n MODE/SET(IVlodo/Configuraci6n) haste que la flecha • apunte a SALT LEVEL (Nivel y un n6mero se muestran en la mitad inferior de Sel), de la pantalla.
  • Page 59 Programaci6n del Suavizante de Agua. CONFIGURACIONESOPCIONALES DEL CONTROL LAVADO REGRESIVO Y ENJUAGUE R/_,PIDO La pantalladelcontroladorcuentacon variasopcionesy Si siente que el sabor del agua es salado Juego de la funciones. regeneraci6n, es posible que necesite incrementar los tiempos del lavado regresivo y de enjuague rapido. ALARMA DE SAL BAJA Los tiempos de los cidos durante las regeneradones Una vez activada LOW SALT...
  • Page 60 Programaci6n del Suavizante de Agua. REAJUSTE A FALTA DE F/_BRICA FUNCION: PANTALLA DE OTROS DATOS Para reiniciar elcontrolador electr6nicode todas los Estosmodelostienen una opci6n para que la pantalla indique informaci6n diferente. La informaci6n mostrada en la mitad configuracionesal ajuste de f6brica par omisi6n(hora, dureza,etc.) superior de la pantalla puede set modificada a una de los siguientes presionando los botones UP (Arriba)Ab.
  • Page 61 Programaci6n del Suavizante de Agua. SENAL DE NIVEL DE SAL BAJO MEMORIA POR CORTE DE CORRIENTE Cuando la funci6n DAYSTO EMPTY(Dias Hasta Si se corta la corriente del suavizante de agua, Vaciarse) cae a 15, la luz azul indicadora y DAYS la "memoria"...
  • Page 62 Cuidado y limpieza. POSICION DEL SERVICIO AJUSTE DE LA DUREZA DEL AGUA (Funcionamiento Normal del Suavizante} La perilla de ajuste de mezcla (Figura 16)le da la posibilidad de ajustar finamente la dureza del agua tratada, dejando Agua Suave el suavizante de agua. Si se desea un agua un poco m6s Hanija de Empuje Afuera Agua Dura...
  • Page 63 Si el suministro de agua posee hierro en el agua salmuera est@colocada. potable, es necesaria una limpieza peri6dica del fondo de resina. GE recomienda el uso de la NOTA: Si usar6 cloruro de potasio (KCI),no supere marca de limpiador de fondo de resina Super Iron el nivel 4 de la etiqueta del pozo de salmuera.
  • Page 64 Rutina de Mantenimiento. LIMPIEZA DEL ENSAMBLE DE LA BOQUILLA EL VENTURI Una limpieza de la boquilla y el venturi es necesaria para Tapa --_ que el sistema suavizante funcione de forma correcta. Esta peque_a unidad hace que la succi6n mueva la Sellodel anilto o ---l_'_l salmuera del 6rea de almacenamiento de sal al tanque de resina durante la recarga.
  • Page 65 Antes de solicitar el servicio t cnico. iLos Consejos para la Soluci6n de Problemas le Permiten Ahorrar tiempo y dinero! Lea primero el cuadro que aparece en esta pdgina yes posible que no necesite solicitar el servicio tdcnico. NO HAY AGUA SUAVE - Problemas M6s Comunes: Realice el controlantes deIlamaral serviciotdcnico: •...
  • Page 66 Antes de solicitar el servicio t cnico. Causa Posible Ou_ hacer • Evite usar agua caliente durante la recarga det Uso de agua caliente mientras sistema suavizante de agua, ya que el calentador sistema suavizante de agua se est6 de agua se volver6 a Ilenar con agua dura. Consulte regenerando la secci6n de Desviaci6n del Agua Dura Durante la Recarga...
  • Page 67 Antes de solicitar el servicio t cnico. Causa Posible Qu_ hacer • Cualquier restricd6n en la monguero de drenaje La v61vula de la manguera de drenaje podr6 impedir un funcionamiento correcto de Io est6 pinzada,atascada, demasiado boquillo y el venturi y redudr o impedir el ingreso de elevodo o de alg_n modo restringida...
  • Page 68 Antes de solicitar el servicio t cnico. Causa Posible Qu_ hacer • Desenchufe el suministro de corriente externo, Es posible que el cableodo se haya aflojado en el control • Retire lu topo del control, libere los sujetadores costado. • Controle que no huya conexiones de cables sueltos/ incorrectus ul toblero electr6nico...
  • Page 69 Configuraci6n) hasta que el cGdigodel modo (H40 para interruptor durante la rotaciGnde la v01vula. GXSH40V o H45 para GXSH45V) a parezca en la pantalla. 1. Mantenga presionado el bot6n MODEISET (Modol EstecGdigo identifica el modo del suavizante.Si se muestra...
  • Page 70 SoluciGn deproblemas avanzadospara elservicio t cnico. Servicio: Control de Recarga Avanzado en forma Manual NOTA:Siel sistemo de presiGndel agua esbajo, una NOTA: La pantallo d e control debe mostrarelhoratio de manguera de drenajeelevado podr6 ocasionar presiGn monero fUo(notitilondo). trasera, deteniendoel ingresode salmuera. 1.
  • Page 71 Vista E×pandida.
  • Page 72 Vista E×pandida. 109-- 1i0--------- Cross-section View --152...
  • Page 73 Listado de Piezas. × REF. NO. GE PART NO. PART DESCRIPTION {O0) {O0) 0002 WS31XIO051 SOPORTE, PLACA 0003 WS35XIO001 KIT DE SELLADO DE ANILLOS 0004 WS34XIO023 CALCOMAN[A, PLACA 0005 WSO7XIO004 MANGUERA, DRENAJE, 20 PIES 0006 WS31XIO044 PANTALLA DE FILTRO 0007...
  • Page 74 Listado de Piezas. REF. NO. GE PART NO. PART DESCRIPTION (00) (00) 0111 WSI9XIO005 PANTALLA DE SOPORTE 0112 WSOJXIO013 PANTALLA 0113 WS22XIO034 ENCHUFE DEL FLUJO, .10 GPM 0113 WS22XIO036 ENCHUFE DEL FLUJO, .15 GPM 0114 WSO8XIO006 JUNTA, BOOUILLA/VENTILACION PANTALLA CONICA...
  • Page 75 EE.UU. Si el producto se encuentra en un drea donde no se encuentradisponible un Proveedor Autorizado de Servicio Tdcnico de GE,usted serdresponsablepar el costa de un viaje o sepodr4 requerir qua traiga elproducto a una Ubicacidndel ServicioTdcnicode GEAutorizado paro recibir el servicio.EnAlaska,Io garantfa excluyeel costa de envfo o Ilamadasdel servicio a su hogan Algunos estados no permiten la exclusidno limitacidn de dahos fortuitos o consecuentes.Estagaranda le do...
  • Page 76 Garantia del Sistema Suavizante de Agua de EJpara Clientes Canadd) Todo elservicio de garantfa esprovisto par nuestros Centros de Serviciode Fobricaci6n,o un tdcnico autorizado. Para solicitor el servicio tdcnico, llame al nOmero gratuito Z866. 777.7627. Cuando llame para solicitor el servicio,tenga losnOmeros de seriey modelo disponibles. Por el Periodo Reemplazaremos: Un ASo...
  • Page 77 Todas las ventas en Iowa requieren la siguiente firma antes de la consumaci6n de la venta. Estas firmas deberan ser conservadas por el vendedor/arrendatario por un mfnimo de 2 aBos Fecha Comprador/Arrendatario Vendedor Fecha Domicilio del Vendedor N° Telef6nico del Vendedor Model GXSH40V or Model GXSH45V...
  • Page 78 Certificado de California. State of California Department of Public Health Water Treatment Device Certificate Number 11 - 2109 Date Issued: September 16, 2011 l"rademark/Model Designation Rep|acelnent Elements GXSH45V 3eneral ElectricCompany Manufacturer: Microbiological Contaminan:_s and Turbidity Organic Contanfinants Rated Serv ce Capac Ratcd:Serviee Flow: 9.5 gpm Conditi0ns...
  • Page 79 Manuales de los Propietados o pedir piezas en linea. Solicite una reparaci6n GEAppliances.com El servicio de expertos GE est6 a tan s61oun paso de su puerta. Llame al 800.GE.CARES (800./432.2737) durante horas normales de ofidna para solidtar su reparad6n. Real Life Design Studio (Estudio de diseho para la vida real) GEAppliances.com...
  • Page 80 Contact Us GEAppliances.com If you are not satisfied with the service you receive from GE,contact us on our Website with all the details including your phone number, or write to: General Manager, Customer Relations GE Appliances, Appliance Park...

This manual is also suitable for:

Gxsh45v

Table of Contents