GE PNSF39Z01 Owner's Manual page 10

About the water softening system.
Set Present Time of Day
Set Water Hardness Number
10
NOTE: If the words PRESENT TIME do not show in the display, press
the SET button until they do.
Press the UP or DOWN button to set. The UP button
1
moves the display ahead; the DOWN button moves the time
backward. If the present time is between noon and midnight,
be sure PM shows
midnight and noon, be sure AM shows
NOTES: Each press of an UP or DOWN button changes the time by
one minute. Holding the button in changes the time 32 minutes
each second.
When the present time shows in display, press SET to apply.
2
NOTE: If HARDNESS does not show in the display, press SET button
until it does.
Press the UP or DOWN button to set your water hardness
1
number in the display. The DOWN button moves the display
down to 1. The UP button moves the display up to 110.
NOTE: Each press of an UP or DOWN button changes the display
by 1 between 1 and 25. Above 25, the display changes 5 at a
time...25, 30, 35, etc. Holding a button in changes the numbers
twice each second.
When the water hardness number shows, press SET to apply.
2
You can get the grains per gallon (gpg) hardness of your water
supply from a water analysis laboratory, or call and ask your
local water department, if you are on a municipal supply.
. If the present time is between
.