Programming Sweet And Whole Wheat Breads - Toastmaster 1196 Use And Care Manual

NOTE: SEE COOKBOOK GUIDE FOR RECIPES.
NOTE:
• Make sure you select the Sweet or Whole Wheat Program. If overlooked, the beeper will not
sound to indicate when to add the additional ingredients.
• If you add the additional ingredients before the machine beeps 4 times, the ingredients will be
chopped into smaller pieces .
• After adding the extras, quickly close the lid to prevent heat loss.
• It is better to select light baking control for a soft and delicious crust.
1. Press program to select Sweet or Whole Wheat Program.
2. Press the START pad. Notice that the timer displays 3:40
(4:00 for Whole Wheat) indicating how long it will take to
complete the bread making program.
3. For the sweet program after about 19 minutes from the start
(and 5 minutes before the secondary kneading is finished),
4 beeps indicate the time to add any additional ingredients
raisins, nuts, cheese, etc.The indicator panel will show 3:21.
For the whole wheat program, after about 1 hour and 30
minutes from the start (and 5 minutes before the secondary
kneading is finished), 4 beeps indicate the time to add any
additional ingredients raisins, nuts, etc.The indicator panel
will show 2:30.
Open the lid and add ingre-
dients quickly and evenly
over the dough. Opening the
lid at this time will not stop
the kneading, so be careful.
Close the lid. Now the unit
will continue through the
remaining stages
automatically.
- 20 -