System Overview; Hp Kayak Xu800 Pc Workstation Overview - HP Kayak XU800 Technical Reference Manual

1

System Overview

This manual describes the HP Kayak XU800 PC Workstation and provides
detailed system specifications.
This chapter introduces the external features, and lists the specifications
and characteristic data of the system. It also provides a summary of the
documentation available.

HP Kayak XU800 PC Workstation Overview

The HP Kayak XU800 PC Workstation is based on the Extended ATX
(E-ATX) form factor.
The following table provides an overview of the system.
Feature
E-ATX with a dimension of 12.8-inch x 11.4-inch.
System Board
All models have support for up to two Intel Pentium® III processors.
Processor
For Processor 1, a VRM (Voltage Regulator Module) is integrated on the
system board, while there is a VRM socket for a second processor.
Cache Memory •
(integrated in processor •
package)
533 MHz, 600 MHz, 667 MHz, 733 MHz, 800 MHz and higher.
Internal CPU Clock Rate
133 MHz Front Side Bus
External Processor Bus
Intel® Chipset (I840) including, Input/Output Controller Hub (ICH), PCI 64-bit
Chipset Hub (P64H), FirmWare Hub (FWH) and Memory Repeater Hub (MRH-S) for
SDRAM support.
NS 87364.
Super I/O Chip
Based on the core of AMIBIOS, including:
BIOS (Basic Input/Output
System)
•
•
•
Flash EEprom: Intel's Firmware hub concept.
Firmware - BIOS
Description
Level-One: 16 KB code, 16 KB data.
Level-Two: i256 KB.
.
4 M/bits of flash memory.
Support for PCI 2.2 Specification.
Support for RDRAM or SDRAM memory modules.
9