Main Menu - HP Kayak XU800 Technical Reference Manual

System Info
Boot Steps
6 Tests and Error Messages
MaxiLife Test Sequence and Error Messages

Main Menu

The main menu is displayed when any of the LCD buttons are pressed
(MaxiLife LCD status panel can be accessed even though the PC
Workstation is turned off). The Main Menu comprises three sub-menus:
System Info, Boot Steps and Diagnostics.
Obtains information from the BIOS and the system's Serial EEPROM from a
previously successful boot. This information includes: product name, BIOS
version, serial number, number of processors and speed, size of memory for
each socket. The following diagram shows how the System Info obtains its
information.
System Info
strings in EEPROM
Shows the Power-On-Self-Test (POST) codes during the system startup.
The POST code is provided by the BIOS and is displayed on the LCD panel
as soon as it is available. If the system stops during the startup, the last
successful boot step POST code is displayed on the LCD. When Boot Steps
is selected, the POST step will be shown on the LCD status panel during the
subsequent boot processes.
To ensure that MaxiLife is ready to display the first POST codes as soon as
possible, the Pre-boot diagnostics are not executed when the system is
booted with the Boot Steps option selected. The following diagram shows
how Boot Steps obtains its information from the BIOS, and then displays a
POST error if needed.
SYSTEM INFO
BOOT STEPS
NEXT GO
This is a toggle item,
which is indicated with
a check mark
112
MaxiLife
Write
BIOS
DMI Table
MaxiLife
"Write
POST
Code"
BIOS
HP KAYAK XU800
LCD Status Panel
HP KAYAK XU800
ERROR XXXX
"Write
POST
ERROR"
ERROR
XXXX