Igmp; Igmp Commands - Exec Level - HP Procurve 2524 Cli Reference Manual

2.15 IGMP

2.15.1 IGMP Commands – EXEC Level
show ip igmp [vlan-id] config
Displays IGMP configuration information.
Output Format:
IGMP Enabled [No] : No
Forward with High Priority [No] : No
Port Type
---- -------- + --------
3 10/100TX | Auto
4 10/100TX | Auto
5 10/100TX | Auto
6 10/100TX | Auto
7 10/100TX | Auto
8 10/100TX | Auto
9 10/100TX | Auto
10 10/100TX | Auto
show ip igmp [<vlan-id> | group <group-address>]
When IGMP is enabled, this command shows a summary of the IGMP status for all
the IP Multicast groups used by the selected VLAN. If the feature is not enabled,
then this command displays "IGMP not enabled".
Output Format:
Active Group Addresses
----------------------
Active Group Address :
Port
---- --------
Active Group Address :
Port
---- --------
Switch Configuration - IGMP Service
IP Mcast
Status and Counters - IP Multicast (IGMP) Status
Reports
-------
Type Access
-----------
Type Access
-----------
| Port Type
| ---- -------- + --------
| 11 10/100TX | Auto
| 12 10/100TX | Auto
| 13 10/100TX | Auto
| 14 10/100TX | Auto
| 15 10/100TX | Auto
| 16 10/100TX | Auto
| Mesh Mesh
|
Queries Querier Access Port
------- ----------------------
Age timer Leave timer
--------- -----------
Age timer Leave timer
--------- -----------
IP Mcast
| Auto
39