Vlan Configuration; Vlan Commands - Exec Level; Vlan Commands - Configuration Level - HP Procurve 2524 Cli Reference Manual

2.13VLAN Configuration

2.13.1 VLAN commands - EXEC level

show vlans
Displays the current VLANs.
Output Format:
VLAN Support [No] : Yes
Maximum VLANs to support [8] : 8
Primary VLAN: DEFAULT_VALN
802.1Q VLAN ID
--------------
1
show vlans <vlan-id>
Displays which ports are assigned to particular VLANs.
Output Format:
Port DEFAULT_VLAN
---- + ------------
1 | Untagged
2 | Untagged
3 | Untagged
4 | Untagged
5 | Untagged
6 | Untagged
7 | Untagged
8 | Untagged
2.13.2 VLAN commands – Configuration Level
max-vlans <1..256>
Sets the maximum number of VLANs on the system. The default value is 8.
Switch Configuration - VLAN Information
Name
------------
DEFAULT_VLAN
Switch Configuration - VLAN - VLAN Port Assignment
vlan2
------------
No
No
No
No
No
No
No
No
Type Status
------ ------
Static Up
| Port DEFAULT_VLAN
| ---- + ------------
| 9 | Untagged
| 10 | Untagged
| 11 | Untagged
| 12 | Untagged
| 13 | Untagged
| 14 | Untagged
| 15 | Untagged
| 16 | Untagged
vlan2
------------
No
No
No
No
No
No
No
No
36