Table of Contents
Advertisement
2 - Location
This cooker has class "2/1" overheating protection so that it can be installed next
to a cabinet.
The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but
not in a room or space containing a bath or a shower.
The appliance must not be installed in a bed-sitting room of less than 20 m
The appliance is designed and
approved for domestic use only
and should not be installed in a
commercial, semi commercial or
communal environment.
Your product will not be guaran-
teed if installed in any of the
above environments and could
affect any third party or public
liability insurances you may have.
If the cooker is installed adjacent
to furniture which is higher than
the gas hob cooktop, a gap of at
least 200 mm must be left
between the side of the cooker
and the furniture.
The furniture walls adjacent to
the cooker must be made of
material resistant to heat.
The veneered synthetic material
and the glue used must be resis-
tant to a temperature of 90°C in
order to avoid ungluing or defor-
mations.
Curtains must not be fitted
immediatly behind appliance or
within 500 mm of the sides.
It is essential that the cooker is
positioned as stated in (Figs. 2.1a
- 2.1b).
The cooker must be installed
by a qualified technician and in
compliance with local safety
standards.
If the cooker is located on a
pedestal it is necessary to pro-
vide safety measures to prevent
falling out.
8
FOR THE INSTALLER
3
.
Model CR 9204
U
A
O
T
Fig. 2.1a
Model CR 1204
A
T
U
O
Fig. 2.1b
Advertisement
Table of Contents
