Messages And Memos; Lcd Alphanumeric Messages, Names, Memos; Storing A Message In Memory; Recording A Message - Toshiba Strata DK8 User Manual

Chapter 4
STRATA DK DIGITAL LCD TELEPHONE
To Store a Message in Memory:
1. Press the LCD Msg Select
(or Intercom 6 8) button.
M S G N O . ?
2. Dial the 2-digit message
number to be stored.
3. Use the Recording a
Message procedure to enter
the message characters.
4. Press the LCD Msg Select
(or Spkr) button.
5. Press the LCD Msg Select
(or Intercom 6 8 Spkr)
button.
LCD ALPHANUMERIC MESSAGES, NAMES,
MEMOS
The LCD on your telephone can be used to send or receive messages to
or from other LCD telephone users. The LCD can also display the
names/numbers of the person calling your telephone or the name of the
person you are calling. Names and memos can also be set to display
with speed dial numbers and timed reminders.

STORING A MESSAGE IN MEMORY

The LCD Msg Select LED flashes.
Personal message (10 ~ 19); system message (60 ~ 99). System
messages can be set from only one station, usually station 10. The
current message, if any, will be displayed.
Refer to the Record a Message procedure following this procedure.
The LCD Msg Select LED lights steadily, and the LCD displays the
message. The message will now be stored in system memory.
The LCD Msg Select LED goes out, and the message will no longer
appear on the LCD, but it will remain in memory. It can be recalled by
steps 1 and 2 of this procedure.

RECORDING A MESSAGE

RECORDING A MESSAGE, NAME, OR MEMO

Use this procedure to enter the characters of user name, speed dial
memo, timed reminder memo, or a personal message (10 ~ 19) or
system message (60 ~ 99), to add to a preprogrammed message, or to
edit and set a new message. After calling up a message on your display
(see Storing a Message in Memory, Steps 1 and 2 above), perform one
of the following procedures:

MESSAGES AND MEMOS

4-1