Table of Contents
Advertisement
Remote Control
Adjusting response time
The user operating the client PC may want to adjust the time out interval. The time
out interval is the number of seconds that the client waits before communicating
with the server.
Adjusting the response time
1.
2.
Stopping communication
The connection between the client PC and the server PC may be closed at any time
from either PC.
Stopping communications from the server PC
In the Inline Server Software, from the Server menu, select Close Connection.
Stopping communications from the client PC
In the ICS100, from the Communications menu, select Close Connection.
5-10
MSG Matrix Switchers • Remote Control
From the Communications menu, select Response Time Out.
Select the appropriate time out interval for your network (4-12 seconds). Note:
Selecting a longer interval will not slow down client-server communication.
Advertisement
Table of Contents
