It is Gold Medal Products Company’s recommendation that this machine be plugged directly into a wall outlet. The use of extension cords is not recommended due to safety reasons and the popper’s performance will be sacrificed/reduced.
Installation 1. Install Graphics 2. Remove (Cut) white cable tie from unit and position the racks in correct position. Note: Keep black cable ties in place. Top and middle racks are positioned under rack mount bolts, on the rack supports. 3.
Care and Cleaning Cleaning Guidelines The plastic exterior of the Cheese Cup Warmer is easy to keep clean. Usually a damp cloth will remove all dirt and grease spots. NEVER USE ABRASIVES. 1. Turn power switch to the OFF position. Disconnect the unit from power source. 2.
3. Please include the machine’s model name, serial number, and date of manufacture (located on the machine nameplate) with your order. 4. Address all parts orders to: Parts Department Gold Medal Products Co. 10700 Medallion Drive Cincinnati, Ohio 45241-4807 (800) 543-0862...
Page 8
Warmer Breakdown Housing Upper p/n 36071 Housing Base p/n 36070 Heater Assembly Fan - Blower p/n 36064 p/n 36075 Clear Door (EX p/n 36064EX) (EX p/n 36075EX) p/n 36079 3 Position Switch Thermostat 120°F Thermostat 140°F p/n 39410 p/n 36110 p/n 36078...
WARRANTY WE WARRANT to the original purchaser the Gold Medal equipment sold by us to be free from defects in material or workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or replacement of any...