HP 441877-00B Software And Configuration Manual page 46

PROBE_RETRY_COUNT
Syntax: probe_retry_count=nnn
o
Description: Changes probes retry count
o
PROBE_SEND_INTERVAL
Syntax: probe_send_interval=nnn
o
Description: Changes probes send interval, nnn counts 1/18 sec
o
PROBE_SET_DEFAULT
Syntax: probe_set_default
o
Description: Restores probes settings to factory settings
o
PROBES
Syntax: probes=[on | off]
o
Description: Enables/disables probes
o
PROBES
Syntax: probes=[BROADCAST|MULTICAST]
o
Description: Changes probes addressing
o
RECOMMIT
Syntax: recommit [team=nnn]
o
Description: Resets a certain mode. Use after hot binding to base drivers with Team=nnn
o
REMOVETEAM
Syntax: removeteam [team=nnn]
o
Description: Removes a team. Use after hot binding to base drivers with Team=nnn
o
REMOVEVLANID
Syntax: RemoveVlanID=nnn
o
Description: Removes the selected VLAN
o
RESET
Syntax: RESET LBN=nnn
o
Description: Supported only after Commit command
o
SECONDARY
Syntax: primary | secondary
o
Description: Identifies the secondary adapter. Supported only in BIND command.
o
SMPMODE
Syntax: SMPMODE=[SMP | NONSMP]
o
Description: Enables/disables SMP aware
o
STATUS
Syntax: status [team=nnn]
o
Description: Prints CPQANS status
o
TEAM
Syntax: team=nnnn
o
Installation 46