Related Manuals for HP NC7170
Summary of Contents for HP NC7170
-
Page 1: User Guide
HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter User Guide June 2007 (Second Edition) Part Number 331899-00B... - Page 2 Intel® is a trademark of Intel Corporation in the U.S. and other countries. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice.
-
Page 3: Table Of Contents
Canadian Notice ............................A-2 Avis Canadien............................ A-2 European Union Notice ..........................A-2 BSMI Notice............................. A-3 Japanese Notice ............................A-3 Korean Notice............................A-3 Appendix B Electrostatic Discharge Overview ..............................B-1 Grounding Methods...........................B-1 HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter User Guide... - Page 4 RJ-45 Pinouts and Crossover Function..................... C-2 10/100 Straight-Through Pinouts ....................... C-3 10/100 Crossover Pinouts........................C-4 Gigabit over Copper Internal Straight-Through Pinouts ..............C-5 Gigabit over Copper External Crossover Pinouts................C-6 HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter User Guide...
-
Page 5: About This Guide
About This Guide This guide can be used for reference when installing HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapters. WARNING: To reduce the risk of personal injury from electric shock and hazardous energy levels, only authorized service technicians should attempt to repair this equipment. -
Page 6: Where To Go For Additional Help
In the United States, call 1-800-345-1518. • In Canada, call 1-800-263-5868. For HP technical support: • In the United States and Canada, call 1-800-652-6672. • Outside the United States and Canada, refer to www.hp.com HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter User Guide... -
Page 7: Introduction
Ethernet adapter with a single, integrated, dual port controller chip that delivers up to 1000 Mb/s Ethernet over twisted-pair (copper) cabling. For best performance, install the adapter in a 64-bit/133 MHz, PCI-X slot. The NC7170 Gigabit Server Adapter is a supported option for selected HP ProLiant servers. -
Page 8: Led Indicators
Introduction Figure 1-1: NC7170 Gigabit Server Adapter LED Indicators The NC7170 Gigabit Server Adapter LED indicators operate as described in the following table. Table 1-1: LED Operations for the NC7170 Adapter Status Description ACT/LINK Link to the adapter is established. The adapter is receiving power and the cable connection is good. -
Page 9: Utp Category 5 Cable
Introduction UTP Category 5 Cable The NC7170 Gigabit Server Adapter can use existing Category 5 (or better) cable to deliver Gigabit Ethernet over copper, according to the IEEE 802.3ab specifications. For new installations, Category 5e cable is recommended. For troubleshooting and other information about cabling, refer to “UTP Cable Specifications”... -
Page 10: Installing The Adapter
• Keep electrostatic-sensitive parts in their containers until they arrive at static-free locations. • Place containers on a grounded surface before removing the contents. • Avoid touching pins, leads, or circuitry. HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter... -
Page 11: Installing The Adapter In A Server
3. Replace the server cover and plug in the power cord. Connecting the Network Cable Network connections for the NC7170 Gigabit Server Adapter can employ existing UTP Category 5 (or better) cable for Gigabit over copper transmissions. For new installations, Category 5e (enhanced Category 5) or better cable is recommended. -
Page 12: Regulatory Compliance Notices
Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user’s authority to operate the equipment. Declaration of Conformity for Products Marked with the FCC Logo –... -
Page 13: Canadian Notice
EN55022 (CISPR 22) – Electromagnetic Interference • EN55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic Immunity • EN61000-3-2 (IEC61000-3-2) – Power Line Harmonics • EN61000-3-3 (IEC61000-3-3) – Power Line Flicker • EN60950 (IEC950) – Product Safety HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter... -
Page 14: Bsmi Notice
Regulatory Compliance Notices BSMI Notice Japanese Notice Korean Notice HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter... -
Page 15: Appendix B Electrostatic Discharge
If you do not have any of the suggested equipment for proper grounding, have an HP authorized reseller install the part. NOTE: For more information on static electricity or assistance with product installation, contact your HP authorized reseller. HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter... -
Page 16: Nc7170 Gigabit Server Adapter Specifications
1000BASE-TX: Category 5 UTP 100 Meters (328 feet) Interrupts Supported Automatically configured Temperature Range Operating: 0°C to 55°C / 32°F to 131°F Storage: -65°C to 85°C / -85°F to 185°F continued HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter... -
Page 17: Utp Cable Specifications
EN60950 ICES-003 Class B • MIC Class B UTP Cable Specifications To connect to the network, the NC7170 Server Adapter uses the following cable for 1000Base-T transmission. • Category 5 UTP or better twisted-pair • 22-26 AWG, 100Ω @ 1MHz •... -
Page 18: 10/100 Straight-Through Pinouts
Brown/White Figure C-1 shows the straight-through 10/100 connector wiring to be used when the crossover function is implemented on the hub or switch. Figure C-1: 10/100 straight-through wiring for RJ-45 connector HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter... -
Page 19: 10/100 Crossover Pinouts
White/Blue Green/White White/Brown Brown/White Figure C-2 shows the correct wiring to use when the crossover function is implemented externally in the twisted-pair cabling. Figure C-2: 10/100 external crossover for RJ-45 connector HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter... -
Page 20: Gigabit Over Copper Internal Straight-Through Pinouts
Gigabit over Copper Internal Straight-Through Pinouts Unlike connections in which the crossover function is implemented internally at the hub or switch, the NC7170 Server Adapter provides its own automatic crossover function. This means you can wire twisted-pair media straight-through for adapter-to-hub, adapter-to- switch, or adapter-to-adapter connections using the pinouts shown in Table C-4. -
Page 21: Gigabit Over Copper External Crossover Pinouts
Figure C-4 shows the correct Gigabit over copper wiring to be used when the crossover function is implemented externally in the twisted-pair cabling. Figure C-4: Gigabit over copper external crossover for RJ-45 connector HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter...