Keywords For B06 Ndis2 Driver - HP 441877-00B Software And Configuration Manual

FixCheckSumOff—This string parameter turns off the driver work-around for the TCP/IP stack to
recognize the 1's complimented version of the checksum.
The following are examples of the use of these keywords in the protocol.ini.
[Q57]
DriverName = "Q57$"
BusNum = 3
DevNum = 14
PortNum = 2
LineSpeed = 100
Duplex = Full
NodeAddress = "001020304050"
To add more adapters (up to four), repeat the entry below, where n can be from 1 to 3.
[Q57_n]
DriverName = "Q57$"
BusNum =
DevNum =
The following examples use additional entries to load more than one adapter in the protocol.ini.
[Q57]
DriverName = "Q57$"
BusNum = 3
DevNum = 10
[Q57_1]
DriverName = "Q57$"
BusNum = 3
DevNum = 11
[Q57_2]
DriverName = "Q57$"
BusNum = 3
DevNum = 12
[Q57_3]
DriverName = "Q57$"
BusNum = 3
DevNum = 13

Keywords for B06 NDIS2 driver

This document describes the keywords for the B06 BNDIS 2 driver (bxnd20x.DOS).
The following keywords are supported through the PROTOCOL.INI file. If a keyword is not present in the
PROTOCOL.INI, the default value is chosen.
Adapter configurations 63