HP 441877-00B Software And Configuration Manual page 44

This counter indicates the number of receive packets with CRC errors. Packets less than 64 bytes are
not counted in this counter.
Tx Threshold
This counter indicates the current value of the Early Transmit Threshold. The adapter starts
transmitting the packet when the specified number of quad-words has been DMAed in from memory.
Current IFS Value
This counter indicates the current value of Inter Frame Spacing between back-to-back transmits.
Jumbo Frames Received
This counter indicates the number of jumbo packets received (packets greater than 1514 in length).
Jumbo Frames Transmitted
This counter indicates the number of jumbo packets transmitted (packets that are greater than 1514
in length).
PCI-X mode (0=PCI, 1=PCI-X)
This counter indicates whether the adapter is in a PCI.
CPQANS custom counters
Number of Tx ECBs Queued in Members
This counter indicates the number of packets (Event Control Blocks) that are queued in team members
for transmission.
Number of Tx ECBs Queued in Unavailable ECBs Queue
This counter indicates the number of transmit packets (Event Control Blocks) that are currently in the
CPQANS transmit queue.
Total Enqueued Tx Due to No Available ECBs
This counter indicates the number of transmit packets that were queued due to no available ECBs.
Number of Probes Sent by All Team Members
This counter indicates the number of probe packets sent by all team members.
Number of Probes Received by All Team Members
This counter indicates the number of probe packets received by all team members.
Advanced Network Services help - supported keywords
AGG_SELECTION
Syntax: AGG_SELECTION=[BANDWIDTH | COUNT]
o
Description: Sets active aggregator selection mode by bandwidth or count
o
BALANCE_INTERVAL
Syntax: balance_interval=nnn
o
Description: Changes Balance interval, nnn counts 1/18 sec
o
BALANCE_SET_DEFAULT
Syntax: balance_set_default
o
Description: Restores Balance interval to factory settings
o
COMMIT
Syntax: commit [team=nnn]
o
Installation 44