Yamaha Apex RX10PA Owner's Manual page 82

Periodic maintenance and adjustment
1. Screw
2. Headlight access panel
6. Disconnect the headlight coupler.
7. Remove the bulb holder cover.
1. Headlight coupler
2. Bulb holder cover
8. Unhook the bulb holder, and then remove
the burnt-out bulb.
1. Bulb holder
9. Install the new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
76
1
2
1. Do not touch the glass part of the bulb.
1
Bulb type:
10. Install the bulb holder cover, and then
2
11. Install the headlight access panel.
12. Connect the headlight unit couplers, and
13. Install the headlight unit, making sure to
1
1
1. Slot
2. Projection
14. Fit the weatherstrip on the headlight unit
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thor-
oughly clean it with a cloth moistened
with alcohol or lacquer thinner.
1
Halogen bulb
connect the headlight coupler.
then install the plastic band.
fit the slots on its bottom over the projec-
tions on its stay.
2
into the recess in the top of the air filter
case cover.
[ECS00621]