1
1. Headlight unit bolt
4.
Unhook the headlight unit as shown, then
lift it up and move it forward, away from
the air filter case cover. NOTICE: Be
careful not to scratch the snowmobile
when moving the headlight unit.
[ECS00920]
1
1. Headlight unit
5.
Loosen the locknut.
6.
To increase the throttle lever free play,
turn the adjusting bolt in direction (a). To
decrease the throttle lever free play, turn
the adjusting bolt in direction (b).
Periodic maintenance and adjustment
2
(a)
1
(b)
1. Locknut
2. Throttle lever free play adjusting bolt
3. Throttle lever free play
Throttle lever free play:
2.0–3.0 mm (0.08–0.12 in)
7.
Tighten the locknut.
8.
Install the headlight unit, making sure to
fit the slots on its bottom over the projec-
tions on its stay.
1
1. Slot
2. Projection
3
2
53