Removal and Replacement Procedures
5. Turn the system board upside down with the rear panel
toward you.
6. While holding the fan assembly with one hand, disconnect
the fan cables 1 from the system board.
✎
Steps 7 and 8 apply only to Pavilion notebook models.
7. Use a 5.0-mm socket to remove the four 9.0-mm standoffs 2
on each side of the parallel and S-Video connectors.
8. Remove the I/O bracket 3.
9. Remove the fan assembly 4.
Removing the Fan Assembly
Reverse the above procedure to install the fan assembly.
5–78
Maintenance and Service Guide