Table of Contents
Advertisement
Fan assembly
Table 5-11
Fan descriptions and part numbers
Description
Fan assembly for use in models 15-dp0000~0999
Fan assembly for use in models 15-bc300~bc399, 15-bc400~bc499, 15-bc500~bc599
Before removing the fan assembly, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the base enclosure (see
3.
Disconnect the cable from the battery (see
Remove the fan assembly:
1.
Disconnect the fan cables from the system board (1), and then release the display cable from the
threading channel in the right fan (2).
2.
Remove the four Phillips M2.0 × 4.0 screws from the fans (3), and then remove the right fan (4) and the
left fan (5) from the computer.
TIP:
Reverse this procedure to install the fan assembly.
IMPORTANT:
54
Chapter 5 Removal and replacement procedures for authorized service provider parts
The right fan sits on top of the left fan on the shared post between the fans near the heat sink.
When replacing the fans, you must install the left fan first.
(Preparation for disassembly on page
Base enclosure on page
36).
Battery on page
Spare part number
L42999-001
L18458-001
36).
38).
Advertisement
Table of Contents
