HP Pavilion zx5000 Maintenance And Service Manual page 175

Removal and Replacement Procedures
9. Remove the following screws that secure the system board
to the top cover:
1 One PM2.5×13.0 screw
2 Four PM2.6×6.0 screws
3 Two slotted PM1.5×10.0 shoulder screws on each side
of the port replicator connector
10. Remove the tape 4 that secures the diskette drive cable
top cover shielding.
11. Peel the diskette drive cable 5 off the top cover shielding.
Removing the System Board on HP Pavilion zv5000 and
HP Pavilion zx5000 Notebook Models
5–68 Maintenance and Service Guide