Setting Day And Time - Panasonic KX-T1 461 Operating Instructions Manual

Setting day and time
1
Incoming messages can be recorded with the day and time the
messaoe was received. This is called the TIME/DAY stamo.
TIME indicator
Flashing: Day and time not set
Off: Day and time set already.
3 4
TIME DAY CHECK button
The FF and the REW buttons are used to program the setting.
Settings are protected for about three hours if external power is cut off.
The clock is accurate to about 45 seconds a month at room temperature
1 2
yet
a
a
a
1
Set the volume.
The central position is usually best
Setting day
Press the TIME ADJUST
button.
" S u n d a y "
i s a n n o u n c e d .
T h e T I M E i n d i c a t o r l i g h t s .
Press the FF or the REW button to
advance or reverse the davs.
Press the MEMO button.
" 1 2 : 0 0 A . M "
i s a n n o u n c e d .
Press the FF or the REW button to
advance or reverse the hours.
Press the MEMO button.
" 0 ( O h ) "
i s a n n o u n c e d .
Press the FF or the REW button to
advance or reverse the mlnutes.
Press the TIME ADJUST
button
to record your settings (The TIME
indicator goes out and the clock starts.)
T h e d a y a n d t i m e i s a n n o u n c e d .
(lf they are wrong, repeat from step 2
above.)
Checking the day and time:
Setting minute
T I M E A D J U S T
Press the TIME DAY CHECK button