Keyboard (Hp Authorized Service Providers Only); Figure 28 - Keyboard Screws; Figure 29 - Folding The Keyboard Open - HP OmniBook 800CCT Service Manual

Keyboard
(HP Authorized Service Providers Only)
Required Equipment
Torx #6 screwdriver
Removal Procedure
1. Exit all applications, including Windows.
2. Turn the OmniBook off and remove the battery and ac adapter.
3. Remove the two keyboard screws from the bottom case. See Figure 28.

Figure 28 - Keyboard Screws

4. Remove the keyboard by inserting your fingertips between the top row of keys and the case
and then lifting. Then fold the keyboard gently forward so that it lies upside down on the
table. Do not pick up the computer while the keyboard is in this position. See Figure 29.

Figure 29 - Folding the Keyboard Open

60
Keyboard Screws
M2.0x0.4x7.0
1.5-3.5 in-lb
(p/n 0515-2846)