HP OmniBook 800CCT Service Manual page 52

Docking Messages
Passwords...
Password options...
User Password
required to:
Admin Password
required to save
changes to PC ID
Disable hard disk
drive lock
Set Admin password
Set User password
PC Identification
Enable Cache
Status Panel Enable
Status Panel
Settings...
Status Panel
Position
Items to Show in SP
Battery Status
Keyboard Status
Hard Drive Status
Selected; not Selected
selected
Turn ON, no
Always; selections
Turn ON, after
FN-OFF;
Undock;
Save Setup
changes
Selected; not Not selected
selected
Selected; not Not selected
selected
none
none
blank
Selected; not Selected
selected
Selected; not Selected
selected
Upper left; Lower Lower right
left; Upper right;
Lower right
Always; Never; Always
Only when low.
Always; Never; Only when
Only when locked
locked.
Always; Never; Only when
Only when active active
Not available if Boot devices only
is selected in Boot Devices
submenu.
Password is required before
proceeding beyond the selected
items, and is ALWAYS required to
save changes to these
checkboxes.
Admin password can be used in
place of any user password.
Check to remove password locking
of hard drive.
Allows entry of Admin password.
Allows entry of User password.
The text entered (max of 4 lines of
24 chars) will be displayed at boot.
Enable cache for faster
performance.
Enable status panel.
Determine where status panel
appears in the display.
Determine what items are
displayed in the status panel, and
when they are displayed
33