Hard Disk Drive (End User Replaceable); Figure 19 - Hard Drive Screws - HP OmniBook 800CCT Service Manual

Hard Disk Drive
(End User Replaceable)
Required Equipment
Torx #6 screwdriver
Removal Procedure
1. Exit all applications, including Windows.
2. Turn the OmniBook off and remove the battery and ac adapter.
3. Use a Torx-T6 screwdriver to remove the two keyboard screws and the three hard drive
screws (the exact location of the hard drive screws vary with the manufacturer of hard drive).
See Figure 19.
Hard Drive Screws
M3.0x0.5x5.0mm
1.5 - 3.5 in-lb
(p/n 0515-2847)

Figure 19 - Hard Drive Screws

4. Turn the OmniBook over and open the cover. Grasp the top edge of the Keyboard and fold
out gently. Note – the Keyboard Flex Cables do not need to be disconnected. See Figure
20 on page 54.
To avoid damage due to keyboard flex cables, do not pull the cables out of
C
:
AUTION
the connectors or pick up the OmniBook while the keyboard is still
connected.
Keyboard Screws
M2.0x0.4x7.0mm
1.5-3.5 in-lb
(p/n 0515-2846)
53