To Adjust Battery Charging Order; Using Disk Drives - HP OmniBook 5000 User Manual

4. Slide the battery module into the empty bay. Carefully press the battery all the way
into the compartment. You will hear a click as the locking switches move outward
and the module is locked in place.
5. Restart your computer.
A second Battery Status icon appears in the LCD Status Panel, showing the charge
level of the new battery.

To adjust battery charging order

When there is only one battery installed, the OmniBook automatically detects and
charges that battery when the ac adapter is plugged in. If you have two batteries
installed, you can specify the order in which they charge. For example, the OmniBook
can charge the most drained battery, then the least drained battery, or it could charge the
battery on the left (Battery 1) first, then the battery on the right (Battery 2).
1. Important: Save all your work—you will be rebooting your OmniBook.
2. Press to start the System Configuration utility.
FN+F2
3. From the Power menu, choose Battery Charging.
4. Select the battery charging order you want, and then choose OK.
5. From the Exit menu, choose Save and Reboot. Choose OK in the Save and Reboot
dialog box.

Using Disk Drives

The OmniBook floppy drive contains one slot (drive A). The OmniBook has one main
hard disk drive (drive C), and two card slots (available for drives D and E). If you have
only one card inserted in the two card slots, that slot is drive D. If you have two cards
inserted, the lower card slot is drive D and the upper card slot is drive E.
17