To Recharge The Battery Or Run On Ac Power - HP OmniBook 5000 User Manual

To recharge the battery or run on ac power

C A U T I O N Use only an HP F1044B ac adapter (t he type shipped with the HP OmniBook 5000).
Using any other adapter could damage the OmniBook and void your warranty.
Always plug it into a grounded outlet. Note that the adapter plug has negative
polarity—the inner contact is negative, and the outer is positive.
You use the ac adapter to recharge the battery pack in the OmniBook. You can also use
it to avoid draining the battery—so it will be at full capacity when you're away from
your desk. (You can even use the ac adapter while the battery is removed.)
It's a good idea to use the ac adapter during operations that take more power—for
example, those involving external connections, such as using a floppy drive or serial
port. You can also use the ac adapter if you don't want the OmniBook to turn off
unexpectedly—when it's plugged in, the OmniBook won't turn off automatically.
The charging light turns on while the ac adapter is plugged in. It shows the charging
status.
If you have a PCMCIA I/O card—that is, a card having an external connection,
such as a modem or network card—remove it when you're not using it. Some I/O
cards use significant power, even while they're inactive.
Plug the power cord into the adapter, then into a grounded ac outlet.
Insert the adapter plug into the socket on the left side of the OmniBook.
AC adapter
Power cord
Orange: Battery is less than 90% charged, ac adapter is connected.
Green: Battery is more than 90% charged, ac adapter is connected.
OmniBook Operating and Recharging Times
Description
Operating time, from 100% charge
Nickel-metal-hydride
Lithium-ion
Recharging times, from 0% charge:
Nickel-metal-hydride
Lithium-ion
* Actual time depends on the particular OmniBook model, type of battery, and actual
usage—see "To save battery
Typical Time
Up to 2 1/2 hours maximum*
Up to 3 1/2 hours maximum*
Up to 3 hours
Up to 4 hours
power".
Charging light
14