Table of Contents
Advertisement
H8DSP-8/H8DSP-i User's Manual
PCI Express Confi guration
Active State Power Management
This setting is used the Enable or Disable the PCI Express L0s and L1 Link
power states.
Remote Access Confi guration
Remote Access
Use this setting to Enable or Disable remote access. If Enabled is selected,
you can select a Remote Access type.
USB Confi guration
This screen will display the module version and all USB enabled devices.
Legacy USB Support
Select "Enabled" to enable the support for USB Legacy. Disable Legacy support
if there are no USB devices installed in the system. The options are Enabled
and Disabled.
USB 2.0 Controller Mode
Select the controller mode for your USB ports. Options are HiSpeed and
FullSpeed. (HiSpeed=480 Mbps, FullSpeed=12 Mbps).
BIOS EHCI Hand-Off
Enable or Disable a workaround for OS's without EHCI hand-off support.
System Health Monitor
CPU Overheat Temperature
Use the "+" and "-" keys to set the CPU temperature threshold to between 65
o
and 90
C. When this threshold is exceeded, the overheat LED on the chas-
sis will light up and an alarm will sound. The LED and alarm will turn off once
the CPU temperature has dropped to 5 degrees below the threshold set. The
default setting is 78
o
C.
4-12
o
Advertisement
Table of Contents
