Table of Contents
Advertisement
H8DSP-8/H8DSP-i User's Manual
S-ATA Confi guration
HT-1000 S-ATA
Use this setting to Enable or Disable the on-chip SATA controller.
S-ATA Mode
Use this to select either IDE, MMIO or RAID as the SATA mode.
ACPI Confi guration
Advanced ACPI Confi guration
ACPI Version Features
Select which version of ACPI you wish to use. Options are ACPI v. 1.0, ACPI
v. 2.0 and ACPI v. 3.0.
ACPI APIC Support
Select "Enabled" to allow the ACPI APIC Table Pointer to be included in the
RSDT pointer list. The options are Enabled and Disabled.
ACPI OEMB Table
This setting when enabled will include an OEMB table pointer to pointer lists.
Options are Enabled and Disabled.
Headless Mode
Select "Enabled" to activate the Headless Operation Mode through ACPI.
The options are Enabled and Disabled.
Event Log Confi guration
View Event Log
Highlight this item and press <Enter> to view the contents of the event log.
Mark All Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear Event Log
This setting will clear all event logs when set to "OK". The options are OK and
Cancel.
4-10
Advertisement
Table of Contents
