Troubleshooting - TP-Link TD-8840T Installation Manual

Troubleshooting

T1. How do I restore my Modem Router's configuration to its factory default
settings?
With the Router powered on, press and
hold the Reset button on the rear panel
for 8 to 10 seconds before releasing it.
Hold it for 8 to 10 seconds
Once the Router is reset, the current configuration settings will be lost and
Note
you will need to re-enter all the parameters.
T2. What can I do if I forgot my password?
1) Restore the Modem Router's configuration to its factory default settings. If you
don't know how to do that, please refer to section T1.
2) Use the default user name and password: admin, admin.
3) Try to configure your Modem Router once again by following the instructions in
the previous steps of the QIG.
T3. What can I do if I cannot access the web-based configuration page?
1) Configure your computer's IP Address.
For Windows XP OS
Go to Start > Settings > Control
Panel, and then you will see the
following page.
Click Network and
Internet Connections
9