Advertisement
C
Configuration For Static IP Address
This page will then display.
Enter the VPI and VCI values
given by your ISP
Manually enter IP Address,
Subnet Mask, Gateway
provided by your ISP
Click NEXT
If you did not get the VPI, VCI, IP Address, Subnet Mask, Gateway
Note
information, please contact your ISP for this information.
After completing the above configuration, please proceed to
Complete.
Quick Start Complete
To continue, the following page will
be displayed.
Click NEXT
Click CLOSE
Now, your Modem Router has been configured and is rebooting. Please do not turn
off the Modem Router while it's rebooting.
7
Quick Start
Advertisement
Need help?
Do you have a question about the TD-8840T and is the answer not in the manual?
Questions and answers