TP-Link TD-8840T Installation Manual page 6

A Configuration for PPPoE/PPPoA
This page will then display.
Enter the Username and
Password given by your ISP
Enter the VPI and VCI values
given by your ISP
Click NEXT
If you did not get the Username, Password, VPI, VCI information, please
Note
contact your ISP for this information.
After completing the above configuration, please skip to
on page 7.
B Configuration For Dynamic IP Address or Bridge Mode
This page will then display.
Enter the VPI and VCI values
given by your ISP
Click NEXT
If you did not get the VPI, VCI information, please contact your ISP for this
Note
information.
After completing the above configuration, please skip to
on page 7.
Quick Start Complete
Quick Start Complete
6