Hard drive
NOTE:
Description
640-GB 5400 RPM
500-GB 7200 RPM
320-GB 7200 RPM
250-GB 7200 RPM
160-GB 7200 RPM
Hard drive hardware kit (includes screws and hard drive bracket)
Hard drive cable/adaptor (included in the cable kit)
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Remove the two Phillips PM2.5×5.0 screws (1) that secure the hard drive cover to the computer.
46
Chapter 4 Removal and replacement procedures
All hard drive spare part kits include a hard drive bracket.
Battery on page
45).
Spare part number
615808-001
600170-001
600169-001
575598-001
600167-001
600191-001
610791–001