Technical Data - IKEA VALFRI User Manual

ENGLISH
Problem
The oven does not heat up.
The oven does not heat up.
The oven lamp does not op-
erate.
The display shows F11.
The display shows 12.00.
Steam and condensation
settle on the food and in the
oven.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Technical data

Dimensions (internal)
Usable volumes (top oven)
Usable volumes (main oven)
Area of baking tray
Top heating element (top oven)
Top heating element (main oven)
Possible cause
The necessary settings are
not set.
The fuse in the fuse box is
released.
The oven lamp is defective.
The core temperature sensor
has a short-circuit or the
core temperature sensor
plug is not tightly in position
in the socket.
There was a power cut.
You left the dish in the oven
for too long.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the appli-
ance cavity.
Height
Width
Depth
42 l
61 l
1175 cm²
1200 W
1000 W
Remedy
Make sure that the settings
are correct.
Do a check of the fuse. If the
fuse is released more than
one time, contact a qualified
electrician.
Replace the oven lamp.
Insert the core temperature
sensor plug as far as it goes
into the socket on the front
of the appliance.
Set the clock.
Do not keep the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing ends.
.........................................
.........................................
.........................................
top: 212 mm/ main: 368 mm
top: 440 mm/ main: 435 mm
top: 448 mm/ main: 409 mm
17