Sim Module Slot Board - HP COMPAQ 6715S Maintenance And Service Manual

SIM module slot board

NOTE:
This section applies only to HP Compaq 6715b computer models with WWAN capability.
Description
SIM module slot board
Before removing the SIM module slot board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Memory/WLAN module compartment cover (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Fan (see
f.
Heat sink (see
g.
Display assembly (see
h.
Top cover (see
i.
System board (see
j.
Remove the SIM module slot board:
Turn the system board right-side up, with the front toward you.
1.
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Switch cover on page
Fan on page 63)
Heat sink on page
Display assembly on page
Top cover on page
System board on page
41).
45)
Expansion memory module on page
54)
56)
62)
64)
68)
73)
80)
Component replacement procedures
Spare part number
443907-001
49)
87