Select
Built-In Device Options
Port Options
94
Chapter 5 Computer Setup
To do this
Enable/disable LAN Power Save. When enabled, saves power by turning off
●
the LAN when not in use.
Enable/disable SATA Native Mode.
●
Enable/disable Dual Core CPU.
●
Enable/disable Secondary Battery Fast Charge.
●
Choose Bit-shift or LBA assisted HDD Translation Mode.
●
Enable/disable Windows direct application launcher.
●
Enable/disable HP Lockout.
●
Enable/disable embedded WWAN Device Radio.
●
Enable/disable embedded WLAN Device Radio.
●
Enable/disable embedded Bluetooth® Device Radio.
●
Enable/disable LAN/WLAN Switching. When enabled, switches to a WLAN
●
when a LAN is either unavailable or disconnected.
Enable/disable Wake on LAN from Off.
●
Enable/disable the ambient light sensor.
●
Enable/disable the serial port.
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
●
CAUTION:
Disabling the USB port also disables MultiBay devices and
ExpressCard devices on the advanced port replicator.
●
Enable/disable the 1394 port.
Enable/disable the cardbus slot.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the infrared port.
●
●
Enable/disable the optical disk drive.
Enable/disable the network controller.
●