Computer Feet; Bluetooth Module - HP COMPAQ 6715S Maintenance And Service Manual

Computer feet

The computer feet are adhesive-backed rubber pads. The feet are included in the Plastics Kit, spare part
number 443905-001. There are 8 rubber feet in 2 different sizes. The feet attach to the base enclosure
in the locations illustrated below.

Bluetooth module

Description
For use only with computer models in all countries or regions except Japan and Asia Pacific (includes
Bluetooth module cable)
For use only with computer models in all countries or regions except Japan and Asia Pacific (includes
Bluetooth module cable)
Before removing the memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the Bluetooth® module:
Position the computer with the front toward you.
1.
Loosen the Phillips PM2.0×5.0 screw (1) that secures the Bluetooth module cover to the computer.
2.
Battery on page 41).
Spare part number
398393-002
450066-001
Component replacement procedures 47