Computer Setup; Starting Computer Setup - HP COMPAQ 6715S Maintenance And Service Manual

Computer Setup

5
WARNING!
troubleshooting and repair procedures are detailed to allow repair at only the subassembly or module
level. Because of the complexity of the individual boards and subassemblies, do not attempt to make
repairs at the component level or modifications to any printed wiring board. Improper repairs can create
a safety hazard. Any indication of component replacement or printed wiring board modification may void
any warranty or exchange allowances.

Starting Computer Setup

Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is
not working or will not load.
NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your
computer.
NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate
and make selections.
NOTE:
An external keyboard connected by USB can be used with Computer Setup only if USB legacy
support is enabled.
To start Computer Setup:
Turn on or restart the computer.
1.
Before Windows® opens and while the "F10 = ROM Based Setup" message is displayed in the
2.
lower-left corner of the screen, press f10.
Only authorized technicians trained by HP should repair this equipment. All
Starting Computer Setup 89