HP COMPAQ 6715S Maintenance And Service Manual page 77

If it is necessary to replace the display hinges, remove the following:
7.
(1) Four rubber screw covers from the display bezel top edge
(2) Four Torx8 T8M2.5×6.0 screws from the display bezel top edge
(3) Two rubber screw covers from the display bezel bottom edge
(4) Two Torx8 T8M2.5×7.0 screws from the display bezel top edge
NOTE: The display bezel rubber screw covers are included in the Display Rubber Kit, spare part
number 446881-001. The display bezel screws are included in the Display Screw Kit, spare part
number 446880-001.
Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
8.
bezel until the bezel disengages from the display enclosure.
Remove the display bezel (3).
9.
NOTE: The display bezel is available using spare part number 446871-001.
Component replacement procedures 71